GT8 series intelligent temperature control instrument

—Panel Size: 48mm×48mm；48mm×96mm；72mm×72mm；96mm×96mm

—Input Signal: T: universal input; A: analog input

—Power Type: linear power supply, switch power supply

—Main Output: relay; logic level; analog output; SCR phase shift/ zero cross; 30A relay output; built-in SCR output, analog isolation

—Alarm Output: no alarm; 1 relay alarm output; 2 relay alarm output; 1 logic level alarm output and 1 relay alarm output; 1 logic level alarm output; 2 logic level alarm output; 1 relay alarm output (normally open/ normally close)

—Strengthened Function: no strengthened function; RS485 communication

—Function Code: for customized product only

—Rated Voltage: Linear power 180V-240V AC, Switch power 85V~265V AC, 50/60 HZ

—Power Consumption: ≤5VA

—Dielectric Strength: power-input: 1500V AC 1min; input-relay output: 1500V AC 1min; power-relay output: 1500V AC 1min

—Insulation Resistance: input-relay output: ＞20MΩ; input-power: ＞20MΩ; power-relay output: ＞20MΩ

—Working Environment: Ambient temperature: 0℃~50℃; Relative Humidity: 35%~85% (no condensation)

—Relay Output: relay contact: AC220V/ DC30V，3A (resistive load or designation)

—Logic level output: ON: DC 12V; OFF: Below DC 0.5V; Max current: 30mA; load resistance≥1K

—SCR zero cross signal: 100mA

—DC 4-20mA output: allowable load resistance below 500Ω

—Input Sensor: TC: ≤100Ω; RTD: ≤5Ω(each wire)

—Measurement Range: K(-270℃～1370℃)；E(-270℃～1000℃)；J(-210℃～1200℃)；S(-50～1768℃)；B(0℃～1820℃)；N(-270℃～1300℃)；R(-50℃～1768℃)；T(-270℃～400℃)；PT100(-200℃～850℃)；Cu50(-50℃～150℃)

—Resolution: 0.1℃ (adjustable)

—Accuracy: ±0.5%FS

—This series is a multi-input product with thermocouple, Platinum resistance, analog voltage input, and analog current input

—In addition to standard controls, optional two-way PID control function (heating and cooling)

—Automatically set PID parameters (AT function)

—Communication function (Optional)

—Support user correcting sensor input

—Compliance with EMC standards